. . . Next Generation Technology Today The Ecotechnics Coolshade Reflector. The Coolshade is an air-tight, fully sealed clear glass tube based reflector with a lamp mounting bracket in its centre. It's perfect for removing the excess heat generated by HID grow lights without leaking unpleasant odours. Always use your Coolshade Reflector with an air extraction system and ducting to transport the heat from your lighting out of your growing environment. As far as are aware our Coolshade Reflectors are the only fully sealed lighting system on the market. (other manufacturers may claim theirs are also fully sealed but in our experience they are more often not). We offer a wide range of Coolsahde Reflectors with different diameters and lengths of the reflector, also options for single and double lamp sockets plus we have both a Coolshade with large external reflector (600mm Coolshade) and also an un-wired option (1000mm Coolshade double lamp holder). Installing your Reflector above your plants: The minimum safe distance between your lamps and the top of the plants below are as follows- 250watt HID lamp: minimum 20cm 400watt HID lamp: minimum 50cm 600watt HID lamp: minimum 60cm Grow Lighting Click on graphic for larger image Coolshade Reflector Overview: Related Products Air-Cooled Diamond Reflector Diamond Reflector Product Feature Area Coolshade Reflector Compatible Lamps for 5”/120mm Coolshade 250w, 400w Compatible Lamps for 6”/150mm Coolshade 250w, 400w, 600w CoolShade Reflector Dimensions PDF Product Information Safety/Assembly Sheets Ecotechnics Information PDF for 400mm and 800mm Coolshade Reflectors Ecotechnics Information PDF for  600mm Coolshade Reflector Ecotechnics Information PDF for  1000mm Coolshade Reflector
Find ecotechnics on facebook
Coolshade Reflectors 5” 120mm x 400mm CoolShade This Coolshade comes complete with internal reflector and small external reflector wings, has 1 light socket for HID lighting and is pre wired ready for use. Please note that ALL Coolshade reflectors MUST always be used with a suitable air extraction system. note: Lamps not included  Compatible HID Lamps: 250w 400w 6” 150mm x 400mm CoolShade This Coolshade comes complete with internal reflector and small external reflector wings, has 1 light socket for HID lighting and is pre wired ready for use. Please note that ALL Coolshade reflectors MUST always be used with a suitable air extraction system. note: Lamps not included Compatible HID Lamps: 250w 400w 600w 6” 150mm x 600mm CoolShade with large external pebble reflector This Coolshade comes complete with internal reflector and large external pebble reflector , has 1 light socket for HID lighting and is pre wired ready for use. Please note that ALL Coolshade reflectors MUST always be used with a suitable air extraction system. note: Lamps not included Compatible HID Lamps: 250w 400w 600w Ecotechnics Coolshade Reflectors The Coolshade is an air-tight, fully sealed clear glass tube with a lamp mounting bracket in its centre. It's perfect for removing the excess heat generated by HID grow lights without leaking unpleasant odours; as far as we know it's the only fully sealed system on the market (other manufacturers claims that theirs are but in our experience they are definitely not). 6” 150mm x 1000mm CoolShade without reflector This Coolshade comes complete with 2 light sockets for HID lighting and is unwired and has NO internal reflector or wings. Please note that ALL Coolshade reflectors MUST always be used with a suitable air extraction system. note: Lamps not included Compatible HID Lamps: 250w 400w 600w upto 1000w dependant upon wiring chosen by the user and suitable cooling provided in the extraction system when used. 6” 150mm x 800mm CoolShade This Coolshade comes complete with internal reflector and small external reflector wings, has 2 light sockets for HID lighting and is pre wired ready for use. Please note that ALL Coolshade reflectors MUST always be used with a suitable air extraction system. note: Lamps not included Compatible HID Lamps: 250w 400w 600w How Coolshade Reflectors work: Air is pulled (but can also be pushed) over the lamp by adding an extractor fan to one side of the tube, the hot vented air is then expelled away from the grow room and your plants. Coolshade reflectors very effective, somewhere in the region of 70-80% of heat is removed, and are therefore very popular with indoor gardeners who have limited space to work with. There are two diameters of glass tube available, 120mm and 150mm. The 120mm diameter is suitable for use with the 250W and 400W versions, the 150mm diameter is suitable for use up to 600W The Ecotechnics Coolshade has been specifically designed to address the problems associated with temperature build up and thermal hotspots in indoor grow rooms. It is not uncommon to find lighting systems of 5Kw or more in grow rooms as growers have become more aware of the relationship between light intensity, crop cycle time and yield. Coolshade reflectors are designed to remove the heat by actively ducting the heat away before it is allowed to enter the growing area allowing you to put the reflector closer to the plants. Simply connect the Coolshade to your extractor fan via ducting. The Cool Shade is mainly used for 250w, 400w and 600 watt lights CoolShade Reflectors are available in 5”/120mm and 6”/150mm diameters: 5”/120mm CoolShade Products: 5”/120mm x 400mm CoolShade (Compatible with 250w or 400w lamps) 6”/150mm CoolShade Products: 6”/150mm x 400mm CoolShade (Compatible with 250w, 400w and 600w lamps) 6”/150mm x 600mm CoolShade with large external pebble reflector (Compatible with 250w, 400w and 600w lamps) 6”/150mm x 800mm CoolShade (Compatible with 250w, 400w and 600w lamps) 6”/150mm x 1000mm CoolShade without reflector (Compatible with 250w, 400w and 600w lamps) Coolshade Reflector 150mm x 400mm note: Lamps not included